astra telematics AT200 Installatiehandleiding

Blader online of download pdf Installatiehandleiding voor {categorie_naam} astra telematics AT200. astra telematics AT200 4 pagina's.

Pagina afdrukken
AT200 Installation Guide
1. Check that the back-up battery is fitted and plugged-in
a. insert a SIM, the device should power-up, as indicated by the LEDs on each side of the
connector:
...and check that LEDs light
2. If LEDs do not light-up, unclip the AT200 enclosure, remove the PCB assembly
and check that the battery is plugged into the PCB connector:
a. Do not attempt to remove the battery from the cover, once it has been stuck down,
as prising or bending could cause fire and smoke.
push SIM all the way in
noting the position of the cut-out corner
check that battery is plugged in here