astra telematics AT200 설치 매뉴얼

{카테고리_이름} astra telematics AT200에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. astra telematics AT200 4 페이지.

AT200 Installation Guide

1. Check that the back-up battery is fitted and plugged-in

a. insert a SIM, the device should power-up, as indicated by the LEDs on each side of the

connector:

...and check that LEDs light

2. If LEDs do not light-up, unclip the AT200 enclosure, remove the PCB assembly

and check that the battery is plugged into the PCB connector:

a. Do not attempt to remove the battery from the cover, once it has been stuck down,

as prising or bending could cause fire and smoke.

push SIM all the way in

noting the position of the cut-out corner

check that battery is plugged in here