astra telematics AT200 설치 매뉴얼 - 페이지 2

{카테고리_이름} astra telematics AT200에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. astra telematics AT200 4 페이지.

3. Fit the Cable

a. The AT200 is supplied with a 3-way power / ignition cable (basic kit) or a 9-way cable

(standard kit). Connect the supplied cable to the device 16-way connector.

3-way basic cable

4. Hook up the electrical connections

a. Connect the RED and BLACK wires to a PERMANENT +12V/+24V vehicle power source

via a 3A fuse. Connect the ignition sense input (Digital 1) to an ignition switched

12/24V signal (i.e. something that only goes live when the vehicle ignition is ON) via a

3A fuse

i. RED

ii. BLACK

iii. WHITE

b. We recommend that all connections should be soldered to ensure reliable

terminations. Crimps and IDC type terminations can be unreliable if used with the

wrong tooling and/or wires sizes.

c. All unused wires should be insulated to avoid undesired behaviour.

9-way standard cable

+12 / +24V

1A FUSED

GROUND

1A FUSED

IGNITION

1A FUSED