astra telematics AT200 Manual de instalação - Página 2

Procurar online ou descarregar pdf Manual de instalação para GPS astra telematics AT200. astra telematics AT200 4 páginas.

3. Fit the Cable

a. The AT200 is supplied with a 3-way power / ignition cable (basic kit) or a 9-way cable

(standard kit). Connect the supplied cable to the device 16-way connector.

3-way basic cable

4. Hook up the electrical connections

a. Connect the RED and BLACK wires to a PERMANENT +12V/+24V vehicle power source

via a 3A fuse. Connect the ignition sense input (Digital 1) to an ignition switched

12/24V signal (i.e. something that only goes live when the vehicle ignition is ON) via a

3A fuse

i. RED

ii. BLACK

iii. WHITE

b. We recommend that all connections should be soldered to ensure reliable

terminations. Crimps and IDC type terminations can be unreliable if used with the

wrong tooling and/or wires sizes.

c. All unused wires should be insulated to avoid undesired behaviour.

9-way standard cable

+12 / +24V

1A FUSED

GROUND

1A FUSED

IGNITION

1A FUSED