Canon PIXMA MX330 Aan de slag handleiding - Pagina 10
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Canon PIXMA MX330. Canon PIXMA MX330 37 pagina's. Cartridge reset
Ook voor Canon PIXMA MX330: Handmatig (4 pagina's)
Pagina afdrukken
- 1. Getting Started
- 2. Remove the Protective Material
- 3. Connect the Telephone Line
- 4. Turn the Power on
- 5. Install the FINE Cartridges
- 6. Set up for Fax Reception
- 7. Install the Software
- 8. Loading Paper
- 9. After Installing the Machine
- 10. Try Using the Machine
- 11. Try Copying
- 12. Print Photos from a Computer
- 13. Send Faxes
- 14. Maintenance
- 15. Specifications
5
7
Lift the Scanning Unit (Cover) (A) slightly and fold the Scanning Unit Support (E), then gently close the Scanning Unit (Cover) (A).
•
Wait until the standby screen appears on the LCD (about 1-2 minutes) and go to the next step.
•
Once you have installed the FINE Cartridges, do not remove them unnecessarily.
•
If an error message is displayed on the LCD, make sure that the FINE Cartridges are correctly installed.
A
E
5
1
2
3
4
6
7
8