Canon PIXMA MX850 Handleiding voor netwerkinstellingen - Pagina 19
Blader online of download pdf Handleiding voor netwerkinstellingen voor {categorie_naam} Canon PIXMA MX850. Canon PIXMA MX850 43 pagina's. Multifunction brochure
Ook voor Canon PIXMA MX850: Aanvullende handleiding (6 pagina's), Installatie-instructies (2 pagina's), Brochure (2 pagina's)
Pagina afdrukken
- 1. Setup Outline
- 2. Setting up the Machine and the Computer (Windows)
- 3. Preparing for Setup
- 4. Installing the Software
- 5. Setting up for Use over Wired Lan
- 6. Setting up the Machine and the Computer (Macintosh)
- 7. Cannot Connect to the Machine (the Machine Is Not Detected)
- 8. Setting up the Machine Again for Use over Network
1 Preparing for Setup
Before installing the MP Drivers in your computer, make sure of the following.
If the installation and adjustment of the machine have not been finished, refer to your setup sheet
to set up the machine properly.
Turn off the firewall function temporarily or change its setting. If you disable the firewall function,
disconnect your network from the Internet.
For information on the firewall function of your security software, refer to its instruction manual or
contact its manufacturer.
Important
After setup is complete, turn back on the firewall function you disabled for setup.
If you connect to a network that is not protected with security measures, there is a risk of disclosing
data such as your personal information to a third party.
Make sure that the configuration of computers, hubs, and other network devices is complete, and
computers can connect to the network.
The configuration and the type of the device vary depending on your network environment. For
details, refer to your device's instruction manual or contact its manufacturer.
Important
A hub and LAN cable are required to connect this machine to a wired LAN. These must be
purchased separately.
Note
In an office setup, consult your network administrator.
®
Since Mac
OS 9, Mac OS X Classic environments, or Mac OS X v.10.3.8 or earlier are not supported,
do not connect the machine to these.
Log on as an Administrator.
Quit all running applications before installation.
The screens in this manual refer to Mac OS X v.10.4.x installation. Screens may vary depending on the
operation system you are using and also depending on the country or region of purchase.
Setting Up the Machine and the Computer (Macintosh)
17