dacell SM110 Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} dacell SM110. dacell SM110 12 pagina's. Digital indicator
Ook voor dacell SM110: Handmatig (4 pagina's)

Pagina afdrukken

DACELL CO., LTD

http://www.dacell.com

TEL:+82-43-2602242, FAX : +82-43-2602245

Checks install place and connection prior to setting, caution the following

instruction.

* No power ON/OFF switches.

Cautions to operate from the voltage supply the moment.

* Input/output part are not isolated electrically.

indicator against over voltage and current and indicator get to the ground connection

* Setting lock mode for system and data protection

* Do not internal disjointing and adjustment voluntarily because the indicator is

composed of electron component and P.C.B circuit to sharp at the static electricity .

DACELL is not liability for mistake to use that change a property voluntarily, change

design, adjustment voluntarily, user carelessness cause defect.

1. Installation

1) Product Spec.

- Spec : 96 ㎜×48 ㎜/3.78" × 1.89"(1/8 DIN)

depth : 126 ㎜/4.96"

- SIZE : 92 ㎜(+1.0/-0) × 45 ㎜(+0.8/-0)

3.62"(+0.04/-0)× 1.77"(+0.03/-0)

* Mount the indicator using Bracket.

* Get a indicator into front of the panel and fixing guide push in a terminal direction

and volt fix.

* Thickness of mounting plane : 1 ㎜～8 ㎜

2) Install place

Install the indicator separately from switching device and relay,

installation as follows.

* MC, Switching device, relay

* Motor

* Dust, moisture, corrosion gas, heat line exist place.

* Operating temperature : 0 ～ 50 ℃

3) Power characteristics

* Install line filter if harmonic source and arc welder exist around.

* Separate sensor and control line from power line

Use the specific cable to protect

* Thyristor unit

avoid