dacell SM110 Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} dacell SM110. dacell SM110 12 pagina's. Digital indicator
Ook voor dacell SM110: Handmatig (4 pagina's)

Pagina afdrukken

DACELL CO., LTD

http://www.dacell.com

TEL:+82-43-2602242, FAX : +82-43-2602245

2. Connection and wiring

1) AC input : 1 and 2 ports, 110/ 220V (50Hz/60Hz).

Separate power cable from sensor cable.

Refer to 5-1).

2) HOLD : 3 and 4 ports.

short state : current display value holding

open state : current value display(normal operation mode)

3) ANALOG OUTPUT : 4 → －(GND), 5 → ＋

Analog output is as following voltage or current

DIP switch 5 on : voltage output.

DIP switch 5 off : current output.

OFF

Adjust zero point and maximum point of analog output using

zero and span VR

signal 0 : zero VR → 0V,

zero range : -3V~ ＋3V, span : 10.5V

0～10V : Switch 5 off → current output mode (0 ~ 20 ㎃)

4) SENSOR connection port : 6,7,8,9 ports

Set the hardware and software as following conditions.

Voltage Output ( 0-5V, 1-5V ,0-10V, 2-10V)

Current Output ( 0-10 ㎃, 0-20 ㎃, 4-20 ㎃ )

signal max : span VR → 10V