Dormakaba ORACODE 480 Series Handleiding voor installatie-instructies - Pagina 2
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Dormakaba ORACODE 480 Series. Dormakaba ORACODE 480 Series 10 pagina's.
Ook voor Dormakaba ORACODE 480 Series: Installatiehandleiding (5 pagina's)
Pagina afdrukken
ORACODE 480 - 480i SERIES
INSTALLATION GUIDE FOR DOOR THICKNESS 1 3/8" TO 2"
WARNING
1.
Please read and follow all directions carefully.
2. This lock is not designed to be used on emergency exit doors.
3. Carefully inspect glass, door frame, door etc. to ensure the recommended procedure will not cause
damage. dormakaba standard warranty does not cover damages cause by installation.
4. Wear safety glasses when making the holes.
5. All the following operations and testing of the lock to be done with door open.
Tools Required
•
Safety Glasses
•
1/2" (13mm) Chisel
•
1/8" (3mm) Drill Bit
•
5/32" (4mm) Drill Bit
•
1" Drill Bit or Hole Saw
•
2 1/8" (54mm) Hole Saw
•
Drill
•
Awl or Center Punch
•
Screwdriver, 1/8" slotted
•
Phillips Screwdriver (#2)
•
Adjustable Square
•
Tape Measure
Door Preparation
1C
A
Adjust backset of deadbolt
2
1
Do not remove tape
The dead bolt is pre-set at 2 3/4"
(70mm) backset. Proceed as illus-
trated to change to 2 3/8" (60mm)
backset, if required.
PK3700 2023-05-01
1A
Install strike on wood frame
For maximum
security, install
reinforcing
plate.
Install long screws
in door stop side
A = Backset = 2 3/4" (70mm) or 2 3/8" (60mm)
1.
2. Place appropriate template (supplied) onto door and mark holes.
1" (25mm )
Hole saw
3. Drill holes as per dimensions on the template, the 1" (25mm) hole to
2 1/8" (54mm ) Hole saw
4. Mortise door edge for dead bolt face plate.
5. Drill 2 1/8" from both sides of the door to prevent unsightly damage.
3
2
3
Determine which template fits your 480 lock installation, either
2 3/8" (60mm) or 2 3/4" (70mm) backset.
be on the center line of door thickness.
Install dead bolt in door
Slot at the bottom
1B
Install strike on steel frame
8-32 X 0.50"
Do not remove tape
2X
14
Door stop