DAEWOO ELECTRONICS FRA-X22D Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DAEWOO ELECTRONICS FRA-X22D. DAEWOO ELECTRONICS FRA-X22D 18 pagina's.

Installation Preparation

Check if the refrigerator can pass a

doorway or enter a door first.

Dimensions (including Door Handles)

906mm 735mm 1770mm

(Width*Depth*Height)

Find a suitable place to install

Sufficient space from the back of refrigerator to the wall for

free air ventilation.

Avoid direct sunlight.

Once the installation place is ready follow the

Note

installation instructions.

If the surrounding temperature of refrigerator

is low (below 5 ), foods can be frozen or the

refrigerator can function abnormally.

If the refrigerator can not

pass through a door

during installation, follow

these steps.

(This guide refers to several models. The real features are

model dependent.)

Remove front bottom cover first, if it is attached.

Pull out bending tube guide and the left water tube.

(Dispenser modes only)

Unscrew top hinge cover with a screw driver.

Turn top hinge fastener counterclockwise 3~4 times.

Disconnect the harness wires.

Lift up the front of hinge to remove. (After the hinge is

removed the door can fall down forward. Be careful!)

Be careful not to damage the water line when removing

the door.