Dafra DRPB48 Bedieningshandleiding

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Dafra DRPB48. Dafra DRPB48 10 pagina's. Pneumatic blind rivet setting tool

DRPB48 Operation Manual

Pneumatic Blind Rivet Setting Tool - DRPB48

READ THIS MANUAL CAREFULLY BEFORE USING THE TOOL !

It is

against injuries.

This tool should be used ONLY to set blind rivets within the TOOL'S CAPACITY. It MUST

NOT be used for other purposes, such as hammer, etc.

This tool should be always operated with compressed air supply within the air pressure

range 0.5Mpa ~ 0.7Mpa.

Always DISCONNECT the air supply from the tool before changing the tool parts, such as

jaws, etc.

DO NOT use the tool in the environment described as below:

 fuel and combustion air.

 temperature rapidly rising.

 humidity, rain, water, storm and thunder, lightning.

When the tool is suspended by the operation hook during use, be sure the tool will not fall.

When using the tool, always carry protective goggles, protective gloves, safety helmet, and

other necessary protections. It is highly recommended for safety reasons.

Only use genuine spare parts for maintenance and repairs.

All repair work must be carried out by skilled personnel, when in doubt, always return the

tool to the distributor.

TOOL CAPACITY

Blind rivets 3.0/3.2mm ~ 4.0mm ~ 4.8/5.0mm standard – 2.4mm optional.

TOOL SPECIFICATIONS

Air supply pressure:

Output traction power:

Stroke:

Net weight:

IMPORTANT

to follow the safety instructions for adequate protection

0.5Mpa ~ 0.7Mpa

8,400N ~ 11,760 N

16mm

1.30kgs