Douglas Dynamics 77750 Handleiding voor installatie-instructies - Pagina 6
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Douglas Dynamics 77750. Douglas Dynamics 77750 17 pagina's. Snowplow
Pagina afdrukkenA‑FRAME TO HEADGEAR
1. Position the A‑frame between the headgear strut
and inner ear, aligning the appropriate hole in the
A‑frame that is determined by distance "d."
2. On each side, insert 1" x 4‑3/4" clevis pins (from
the shipping bracket) from the outside of the
headgear through the correct A‑frame holes.
Secure the clevis pins with 1" flat washers and
1/4" x 1‑1/2" cotter pins found in the parts bag.
1" x 4-3/4"
Clevis Pin
Lit. No. 52238, Rev. 05
INSTALLATION INSTRUCTIONS
3. Fold the headgear forward and pin the lift cylinder
to the A‑frame using a 2‑1/8" x 1/2" clevis pin and
1‑1/2" x 5/32" cotter pin from the parts bag.
4. Verify that the stand actuator pin is on top of the
stand.
Stand Actuator Pin
1" Flat Washer
Stand
6
1/4" x 1-1/2"
Cotter Pin
July 15, 2020