Douglas Dynamics 77750 Kurulum Talimatları Kılavuzu - Sayfa 6
Otomobil Aksesuarları Douglas Dynamics 77750 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Douglas Dynamics 77750 17 sayfaları. Snowplow
Sayfayı YazdırA‑FRAME TO HEADGEAR
1. Position the A‑frame between the headgear strut
and inner ear, aligning the appropriate hole in the
A‑frame that is determined by distance "d."
2. On each side, insert 1" x 4‑3/4" clevis pins (from
the shipping bracket) from the outside of the
headgear through the correct A‑frame holes.
Secure the clevis pins with 1" flat washers and
1/4" x 1‑1/2" cotter pins found in the parts bag.
1" x 4-3/4"
Clevis Pin
Lit. No. 52238, Rev. 05
INSTALLATION INSTRUCTIONS
3. Fold the headgear forward and pin the lift cylinder
to the A‑frame using a 2‑1/8" x 1/2" clevis pin and
1‑1/2" x 5/32" cotter pin from the parts bag.
4. Verify that the stand actuator pin is on top of the
stand.
Stand Actuator Pin
1" Flat Washer
Stand
6
1/4" x 1-1/2"
Cotter Pin
July 15, 2020