Baumer PAC50H Bedieningshandleiding - Pagina 11
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Baumer PAC50H. Baumer PAC50H 44 pagina's.
Pagina afdrukken
Baumer
6
Installation
6.1
Introduction
Prior to installation ensure the following:
During sensor installation, the higher-level machine is in a safe state.
n
The sensor's installation position considers plant-specific criteria and sensor requirements.
n
Also see about this
2 Mounting prerequisites [} 11]
2 Installation positions [} 11]
6.2
Mounting prerequisites
For sensor installation in the higher-level machine consider the following:
The installation site will not expose the sensor to excessive vibration.
n
The installation site will not expose the sensor to excessive dirt and contamination.
n
At the installation site, the sensor is protected against direct sunlight.
n
The installation site enables appropriate sensor grounding.
n
The installation site allows for appropriate electrical sensor connection.
n
The installation site allows for free sensor access at all times.
n
Any mechanical impacts on the sensor during operation are excluded.
n
Mounting does consider the installation positions.
n
Also see about this
2 Installation positions [} 11]
2 Electrical connection [} 16]
6.3
Installation positions
For proper function, make sure the sensor is always fully immersed in the liquid under all
n
operating conditions.
Align the bore to the flow direction to ensure self-cleaning of the sensor.
n
Install the sensor in a centered position inside the pipe.
n
Baumer recommends to install the sensor at least one meter away from bends to eliminate
n
problems by turbulences in the flow direction.
V1 | PAC50H/S
1 m
Operating Manual
Installation
|
6
11