Advance Welding AW315 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Advance Welding AW315. Advance Welding AW315 15 pagina's.

AW315

AW315 - Operator Manual

Using the equipment

This welding unit takes the ambient temperature into account when calculating the

energy required to weld the fitting. It must therefore be allowed to reach ambient

temperature before use and must be at the same temperature as the fitting to be

welded.

• Switch the welder on and it will self test.

• The green power light will be on. Make sure no errors are showing.

• Connect the required colour welding cable to the socket, the indicator light will

show.

• YELLOW: 32mm – 160mm

Geberit, Wavin Waviduo, Akatherm, Valsir

• RED: 200mm – 315mm

Geberit

• BROWN: 200mm – 315mm

Wavin Waviduo

• BLUE: 200mm – 315mm

Akatherm, Valsir

• Connect the welding cable to the fitting.

• Press and hold-in the start button for two seconds to begin welding.

• The weld time will count up to 100% and the green light will come on.

• Any errors will be shown.

• Disconnect the welding cable from the fitting.

• To reset the welder press and hold-in the Start/Stop button for five seconds.

• To help avoid errors, use a good quality 2.5 kW / 3.0 kVA power generator to the

specifications TIN12/ECE3.