Amphion Create BaseTwo25 Referentiehandleiding - Pagina 6

Blader online of download pdf Referentiehandleiding voor {categorie_naam} Amphion Create BaseTwo25. Amphion Create BaseTwo25 12 pagina's.

Front panel controls

Power button

Power button turns on the power of the unit. Please note that hard bypass is enabled also when power is off, and

that the unit always switches to active mode after power is switched on.

PLEASE NOTE! Turn on power before feeding signal into the amplifier.

PLEASE NOTE! If power of the amplifier switches off after a few seconds when turned on, please make sure that

you push the power button all the way in.

Active button

Active button switches the unit between hard bypass and active mode. The BaseTwo25 is active when the light is on.

PLEASE NOTE! BaseTwo25 improves the headroom of the monitor connected to the system, by transforming

a 2-way monitor into a cohesive 3-way full range system. In order to prevent damage to the monitors, please

exercise caution and reduce the listening volume before engaging the by-pass function.

483 mm / 19"

89 mm

3½"