Amphion Create BaseTwo25 Referentiehandleiding - Pagina 8
Blader online of download pdf Referentiehandleiding voor {categorie_naam} Amphion Create BaseTwo25. Amphion Create BaseTwo25 12 pagina's.
Pagina afdrukken
Back panel connections
4
4
Input +4dB (L and R)
These are the balanced inputs for your stereo signal. If you are using an unbalanced source, it is recommended
to connect XLR pin 3 to pin 1.
5
Main out (L and R)
These are the outputs for your main power amp and speakers. If you are using an unbalanced destination,
it is recommended to leave XLR pin 3 unconnected.
Base out
6
Neutrik Speakon (NL2FX) 2-pole speaker outputs for the BaseTwo25 towers.
Footswitch
7
Possibility of using a foot-switch in addition to the by-pass button on the front of the device. This allows using
a foot pedal to activate the by-pass model in cases, where the controller is located further away from the user.
IEC power connector
8
Power input, auto switching in the 100-240V range, internally fused.
5
6
430 mm / 17"
8
7
8