Amplico Impact-C Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Amplico Impact-C. Amplico Impact-C 12 pagina's. Impact-c tower pc system

STEP 4 - CALL TECHNICAL SUPPORT

If none of the previous steps have resolved your problem, please call the Amplicon technical support line on

0844 324 0617.

PLEASE NOTE: High-speed CD drive vibration is normal and may cause noise, which does not indicate a defect

in the drive or the CD or DVD.

NO MUSIC PLAYS WHEN A CD IS INSERTED

STEP 1 - ADJUST THE WINDOWS VOLUME CONTROL

Click the speaker icon in the lower-right corner of your screen.

Ensure that the volume is turned up by clicking the slidebar and dragging it up.

Ensure that the sound is not muted by clicking any boxes that are checked.

STEP 2 - CHECK THE SPEAKERS OR HEADSET CONNECTIONS

If you can't hear sound through your speakers please see the following section on checking speakers.

If you can't hear sound through your headphones, please see the following section on checking your headset.

5.3 Speakers & headsets

CAN NOT HEAR ANY SOUND THROUGH SPEAKERS OR HEADSET

PLEASE NOTE: The volume control in some MP3 players overrides the Windows volume setting. If you have

been listening to MP3 songs, ensure that you did not turn the player volume down or off.

CAN NOT HEAR ANY SOUND THROUGH SPEAKERS

STEP 1 - CHECK THE SPEAKER CABLE CONNECTIONS

Ensure that the speakers are connected as shown on the setup diagram supplied with the speakers. If you

purchased a sound card, ensure that the speakers are connected to the card.

STEP 2 - ENSURE THAT THE SUBWOOFER AND THE SPEAKERS ARE TURNED ON

See the setup diagram supplied with the speakers. If your speakers have volume controls, adjust the volume,

bass, or treble to eliminate distortion.

STEP 3 - ADJUST THE WINDOWS VOLUME CONTROL

Click or double-click the speaker icon in the lower-right corner of your screen. Ensure that the volume is turned

up and that the sound is not muted.

STEP 4 - DISCONNECT HEADPHONES FROM THE HEADPHONE CONNECTOR

Sound from the speakers is automatically disabled when headphones are connected to the computer's front-

panel headphone connector.

STEP 5 - TEST THE ELECTRICAL OUTLET

Ensure that the electrical outlet is working by testing it with another device, such as a lamp.

STEP 6 - ELIMINATE POSSIBLE INTERFERENCE

Turn off nearby fans, fluorescent lights, or halogen lamps to check for interference.

Amplicon.co.uk

Sales:

+44 (0) 1273 570 220

IT and Instrumentation for industry

Website:

www.amplicon.com

Email: