Caratec CEA100G Installatie- en gebruikershandleiding - Pagina 4

Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} Caratec CEA100G. Caratec CEA100G 9 pagina's. Gas sensor

Caratec Electronics CEA100G gas sensor

Product information

The CEA100G gas alarm detects different gases, such as propane / butane (LPG),

carbon monoxide and anaesthetic gases. The as alarm alerts by means of an alarm

signal when it detects the gases.

The CEA100G is a professional and highly sensitive alarm that will warn (sleeping)

occupants by a loud signal. The alarm reacts to the smallest gas concentrations

so that the gases don't have time to exert adverse effects on humans and animals.

When the as alarm detects a gas concentration in the ambient air, it will generate

a 40 second during pre-alarm. If the gas concentration remains constant during

the pre-alarm or is increasing, the alarm is activated with a continuous alarm tone

and the red LED constantly shines. If the gas concentration after the alarm has

disappeared, the as alarm will return to the standby mode.

The CEA100G gas alarm is connected to the 12V supply of the vehicle. The alarm

should be installed 30 cm in height above the floor.

For a faultless alarm operation ambient air must not contain environmentally

harmful gases. Naturally, the operation of the alarm for your safety should be

checked regularly. You can do this by turning on the alarm and wait until the green

LED remains shining after the self-test. Then press the button of a gas-lighter next

to the lateral openings of the gas alarm (only gas, no flames).

After a few seconds you will hear the 40 seconds during pre-alarm, wich will be

followed by the alarm, if you keep on steaming the gas into the casing.

Because some gases rise and some gases fall, it is possible to improve the

operation of the additional gas alarm by placing an extra optional sensor (CEZ101)

that can be mounted at a different height or position.

The extra sensors detect all the same gases as the main alarm. It is possible to

connect 2 extra sensors per main alarm for example on another height or in a

different room.

4 4