Follett Horizon Elite HCD1410RJS Handleiding voor installatie-instructies - Pagina 5
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Follett Horizon Elite HCD1410RJS. Follett Horizon Elite HCD1410RJS 17 pagina's. Ice machine models with ride technology
installation instructions for drop-ins
Ook voor Follett Horizon Elite HCD1410RJS: Handmatig (8 pagina's), Handmatig (8 pagina's)
Pagina afdrukken
Prepare the installation site.
Provide drainage, water supply and electrical power to within 6 feet (2m) of ice
machine in accordance with local and national codes. Outdoor installation of
low side is not recommended and will void warranty.
2.1
2.1
Installation site requirements
Electrical
➊
• 120/60/1-5 amps
Potable water supply
• 10-70 psi (69-483kpa)
• 45-90 F (7-32 C)
• Follett recommends the use of an in-line water filtration system (item# 00130286)
• This equipment is to be installed with adequate backflow protection to comply with applicable
federal, state, and local codes
➌
Drain
(3/4" MPT)
• The drain line from the ice machine must have at least 1/4" per foot pitch (6,4 mm/0,3 m)
Refrigeration lines
➍
• 5/8" ∅ (15,8 mm) diameter suction line (insulated)
• 3/8" ∅ (9,5 mm) liquid line
DROP-IN • RIDE Technology
➋
(3/8" push-in internal connection, 3/8" OD tubing required)
➎
remote condensing
Site preparation
➎
3/8" ∅ (9,5 mm)
➍
➊
➋
1/4" per foot
(6,4 mm per 0,3 m)
➌
➍
2
5/8" ∅ (15,8 mm)
NEMA
5-15
5