Follett FZR5-PL Series Installatie-, Bedienings- en Onderhoudshandleiding - Pagina 6
Blader online of download pdf Installatie-, Bedienings- en Onderhoudshandleiding voor {categorie_naam} Follett FZR5-PL Series. Follett FZR5-PL Series 20 pagina's. -30 c undercounter plasma freezer
Ook voor Follett FZR5-PL Series: Installatie-, Bedienings- en Onderhoudshandleiding (17 pagina's), Installatie-, Bedienings- en Onderhoudshandleiding (20 pagina's)
Pagina afdrukken
Changing Temperature Display - Optional
NOTICE!
It is important that you review the temperature cut-out settings
after you change the temperature display. The controller contains
two separate temperature channels; F and C. Changes made
to the factory default settings while displaying temperatures
in F will not automatically transfer when you change the
temperature display to C.
Follett freezers are factory-set to display temperatures in degrees C
(Celsius). To display the temperature in degrees F (Fahrenheit), follow
these steps:
1. Move the power switch to OFF and unplug the freezer.
2. Remove the front lower panel cover (Fig. 6) to access the
controller.
3. Locate jumper wires connecting pins #9 and #11 (Fig. 7) and
disconnect.
4. Reinstall the front lower panel cover.
5. Plug in the freezer and return the power switch to ON.
Temperature Surveillance Module
Follett's all-in-one temperature alarm and chart recording module (manufactured for Follett by Dickson) may be
included with your FZR5-PL. Please refer to the instructions packed with this module for set-up and operation
instructions.
A quick set-up guide has also been included (form# 00168609). This instruction sheet is also available in the
Library section of the Follett website (www.follettice.com).
If equipped with temperature surveillance module, Follett's monitoring bottle and temperature probe has already
been installed in the Follett FZR5-PL. Simply plug the loose end of the probe wire into the back of the freezer
surveillance module to complete the install.
A box of sixty (6) -50 to +50 7-day charts have also been included with this module. Replacement charts and pens
can be ordered by visiting www.follettice.com and choosing "order parts" .
Item# 00162099 – Box of sixty (60), -50 to +50 7-day replacement charts
Item# 00162081 – Box of six (6) replacement red pens
Charts with different temperature scales are also available directly from Dickson www.dicksondata.com.
Automated Medication Dispensing and Inventory Systems Interface
(Pyxis
, Omnicell
, MedSelect
*
*
Follett refrigerators and freezers are compatible with most major automatic medication and inventory systems.
In some cases a Follett bracket accessory is required. Contact factory for further information.
* Pyxis is a registered trademark of Cardinal Health in the United States and other countries.
Omnicell is a registered trademark of Omnicell, Inc. in the United States.
MedSelect is a registered trademark of AmerisourceBergen Technology Group, in the United States.
6
FZR Undercounter Plasma Freezer
, etc.)
*
Fig. 6
Fig. 7
C/F Jumper Wire
1
2
3
4
5
6 7
8
programming key
Probe
9 10 11 12
11 12
!
•
•
•
•
•
Controller
(accessory)