Follett FZR5-PL Series Installatie-, Bedienings- en Onderhoudshandleiding - Pagina 4

Blader online of download pdf Installatie-, Bedienings- en Onderhoudshandleiding voor {categorie_naam} Follett FZR5-PL Series. Follett FZR5-PL Series 20 pagina's. -30 c undercounter plasma freezer
Ook voor Follett FZR5-PL Series: Installatie-, Bedienings- en Onderhoudshandleiding (17 pagina's), Installatie-, Bedienings- en Onderhoudshandleiding (20 pagina's)

Installation ––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Installing Legs – Required

1. Remove legs from plastic bag packed inside freezer.

2. Tip freezer back and screw legs in all the way to stop (Fig. 1). Legs

will extend 1/8" (3.175mm) below base of freezer.

3. Adjust legs as needed to level freezer in both directions. To access

legs, remove the lower front panel. Turn legs clockwise to extend

legs.

Changing Temperature Controller Settings – Optional

Follett's temperature controller is pre-programmed with a -35 C (-31 F)

set point and degrees C display. The -35 C (-31 F) set point delivers a

temperature range of -33 to -35 C (-27 to -31 F).

Follett's controller set point can be changed to deliver up to a -25 C (-13 F)

temperature for applications where a lower temperature is not desired. See

Controller Operation on page 7

FZR Undercounter Plasma Freezer

to change controller settings.

Fig. 1

Fig. 2