Follett FZR5-PL Series Kurulum, Çalıştırma ve Servis Kılavuzu - Sayfa 4
Dondurucu Follett FZR5-PL Series için çevrimiçi göz atın veya pdf Kurulum, Çalıştırma ve Servis Kılavuzu indirin. Follett FZR5-PL Series 20 sayfaları. -30 c undercounter plasma freezer
Ayrıca Follett FZR5-PL Series için: Kurulum, Çalıştırma ve Servis Kılavuzu (17 sayfalar), Kurulum, Çalıştırma ve Servis Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Installation ––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Installing Legs – Required
1. Remove legs from plastic bag packed inside freezer.
2. Tip freezer back and screw legs in all the way to stop (Fig. 1). Legs
will extend 1/8" (3.175mm) below base of freezer.
3. Adjust legs as needed to level freezer in both directions. To access
legs, remove the lower front panel. Turn legs clockwise to extend
legs.
Changing Temperature Controller Settings – Optional
Follett's temperature controller is pre-programmed with a -35 C (-31 F)
set point and degrees C display. The -35 C (-31 F) set point delivers a
temperature range of -33 to -35 C (-27 to -31 F).
Follett's controller set point can be changed to deliver up to a -25 C (-13 F)
temperature for applications where a lower temperature is not desired. See
Controller Operation on page 7
4
FZR Undercounter Plasma Freezer
to change controller settings.
Fig. 1
Fig. 2