Follett FZR5-PL Series 설치, 운영 및 서비스 매뉴얼 - 페이지 4

{카테고리_이름} Follett FZR5-PL Series에 대한 설치, 운영 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett FZR5-PL Series 20 페이지. -30 c undercounter plasma freezer
Follett FZR5-PL Series에 대해서도 마찬가지입니다: 설치, 운영 및 서비스 매뉴얼 (17 페이지), 설치, 운영 및 서비스 매뉴얼 (20 페이지)

페이지 인쇄

Installation ––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Installing Legs – Required

1. Remove legs from plastic bag packed inside freezer.

2. Tip freezer back and screw legs in all the way to stop (Fig. 1). Legs

will extend 1/8" (3.175mm) below base of freezer.

3. Adjust legs as needed to level freezer in both directions. To access

legs, remove the lower front panel. Turn legs clockwise to extend

legs.

Changing Temperature Controller Settings – Optional

Follett's temperature controller is pre-programmed with a -35 C (-31 F)

set point and degrees C display. The -35 C (-31 F) set point delivers a

temperature range of -33 to -35 C (-27 to -31 F).

Follett's controller set point can be changed to deliver up to a -25 C (-13 F)

temperature for applications where a lower temperature is not desired. See

Controller Operation on page 7

FZR Undercounter Plasma Freezer

to change controller settings.

Fig. 1

Fig. 2