Amsino PUGGLE Snelle referentiehandleiding - Pagina 3
Blader online of download pdf Snelle referentiehandleiding voor {categorie_naam} Amsino PUGGLE. Amsino PUGGLE 12 pagina's. Enteral feeding pump
Ook voor Amsino PUGGLE: Snelle installatie (2 pagina's)
Pagina afdrukken
1
Installation of the Tubing
Open pump cover. Place the silicone
loop around the rotor and make sure the
cassette is in the right direction.
Push the cassette in the middle of the
pins with your thumb and make sure the
cassette is well positioned between the two
black pins.
Guide both tubes down, in line with their
respective slots.
Close the pump cover, then place the
adapter into the designated slot.
Remove the protective cap from the distal
connector (end of downstream tube that
goes on the patient's feeding tube).
Launch automatic priming (see step 3).
Connect the tubing to the patient enteral
feeding tube and program the pump.
2
Switching on the Pump
Turn on the PUGGLE™ pump by holding the
on/off button [
Starting Up
] until a beep is heard.
Menu
3