Amsino PUGGLE Краткое справочное руководство - Страница 3
Просмотреть онлайн или скачать pdf Краткое справочное руководство для Водяной насос Amsino PUGGLE. Amsino PUGGLE 12 страниц. Enteral feeding pump
Также для Amsino PUGGLE: Быстрая настройка (2 страниц)
Печатать страницу
1
Installation of the Tubing
Open pump cover. Place the silicone
loop around the rotor and make sure the
cassette is in the right direction.
Push the cassette in the middle of the
pins with your thumb and make sure the
cassette is well positioned between the two
black pins.
Guide both tubes down, in line with their
respective slots.
Close the pump cover, then place the
adapter into the designated slot.
Remove the protective cap from the distal
connector (end of downstream tube that
goes on the patient's feeding tube).
Launch automatic priming (see step 3).
Connect the tubing to the patient enteral
feeding tube and program the pump.
2
Switching on the Pump
Turn on the PUGGLE™ pump by holding the
on/off button [
Starting Up
] until a beep is heard.
Menu
3