AirSource TempAir Handleiding voor installatie, bediening en onderhoud - Pagina 3
Blader online of download pdf Handleiding voor installatie, bediening en onderhoud voor {categorie_naam} AirSource TempAir. AirSource TempAir 20 pagina's. Air handling units, airsource heatpumps
Pagina afdrukken
WARRANTY
General
To be read in conjunction with AirSource Ltd standard Terms & Conditions of Sale.
The equipment is covered against defective parts and workmanship under the terms
of the AirSource Ventilation Ltd warranty for the period of 12 months from the date
of delivery, and is restricted to installations within the UK only.
Any replacement parts supplied under the warranty shall be warranted for the
unexpired period of the warranty or 3 months from delivery whichever period is the
longer.
Procedure
In the event of component failure during the warranty period please notify our
service department, the following details will be required to process any warranty
claim:
The unit serial number.
Full commissioning documentation.
Full description of the fault. Further details/checks may be required to
be carried out prior to our engineer's attendance at site.
A purchase order number in the event that the fault is not covered under
the terms of the warranty.
An engineer will be scheduled to attend at the earliest availability to carry out an
inspection/repair of the fault reported. Our response will depend on the availability of
an engineer and the parts required to carry out the repair. Work outside of normal
hours will not be covered under the terms of the warranty.
Any specific access equipment required for safe working is to be provided and
erected for our use and any obstructions to the equipment are to be removed to
enable a clear working area around the unit/faulty component. Sufficient space
should be available for the removal of components if required – see installation
requirements within this manual.
Invalidation
The warranty may be refused for the following reasons:
of Warranty
Failure to install, set up, put to work or maintain any part of the
equipment as specified in AirSource Ventilation Ltd Installation,
Operation and Maintenance Instructions.
Misapplication of product or components.
On receipt, failure to identify any damage to equipment on the delivery
note & notify AirSource Ventilation Ltd in writing within three (3) days.
Modifications to designed arrangement or performances without the
prior written approval of AirSource Ventilation Ltd.
Damage caused to equipment on site through lack of adequate
protection from the elements or misuse by other trades.
Failure to observe all normally accepted engineering practices during
installation, commissioning and subsequent operation of equipment.
Installation, Operation & Maintenance Manual
2