AirSource TempAir Handleiding voor installatie, bediening en onderhoud - Pagina 5
Blader online of download pdf Handleiding voor installatie, bediening en onderhoud voor {categorie_naam} AirSource TempAir. AirSource TempAir 20 pagina's. Air handling units, airsource heatpumps
Pagina afdrukken
DELIVERY
General
Upon receipt of equipment a visual inspection should be made and any damage
Upon receipt of equipment a visual inspec
noted on the delivery form. Particulars of any damage or short delivery should be
noted on the delivery form. Particulars of any damage or short delivery should be
noted on the delivery form. Particulars of any damage or short delivery should be
endorsed by the driver delivering the equipment. No responsibility can be held for
endorsed by the driver delivering the equipment. No responsibility can be held for
endorsed by the driver delivering the equipment. No responsibility can be held for
damage sustained during the unloading from the delivery vehicle or on the site
damage sustained during the unloading from the delivery
thereafter.
All claims for damage or short delivery should be advised to AirSource Ltd in
All claims for damage or short delivery should be advised to AirSource Ltd in
All claims for damage or short delivery should be advised to AirSource Ltd in
writing within three (3) days of receipt.
writing within three (3) days of receipt.
Unloading & Handling Lifting Points
Fork lift
If
off-loading
with
Manitou or Fork lift, use
fork extensions as required
to extend past the full
width of the unit.
4 Point Crane Lift
Longer straps will reduce the sideways force
Longer straps will reduce the sideways force
applied to the roof and help prevent damage
applied to the roof and help prevent damage to
the unit. Use of spreader beams is recommended
the unit. Use of spreader beams is recommended
to prevent damage to the sides of the AHU.
to prevent damage to the sides of the AHU.
6 Point Crane Lift
Use of spreader beams is recommended to
Use of spreader beams is recommended to
prevent damage to the sides of the
straps/chains should be vertical during lift).
straps/chains should be vertical during lift).
oints
a
IMPORTANT: Ensure the forks extend beyond the casing of the unit.
IMPORTANT: Ensure the forks extend beyond the casing of the unit.
IMPORTANT: Ensure the forks extend beyond the casing of the unit.
the AHU (all
tion should be made and any damage
vehicle or on the site
Installation, Operation & Maintenance Manual
stallation, Operation & Maintenance Manual
4