Bosch Ascenta SHE5AM02UC Instructies voor reparatie - Pagina 18

Blader online of download pdf Instructies voor reparatie voor {categorie_naam} Bosch Ascenta SHE5AM02UC. Bosch Ascenta SHE5AM02UC 50 pagina's. Quick reference instructions
Ook voor Bosch Ascenta SHE5AM02UC: Handleiding voor installatie-instructies (21 pagina's), Energie Handleiding (2 pagina's), Aan de slag (2 pagina's), Reparatie-instructie (27 pagina's)

4.12.1 Backflow valve

The backflow valve is located inside the sump at the internal

drain hose inlet. It prevents waste water from entering the sump.

1. Backflow valve assembly

2. Flap

4.13

Tank with base and sump

4.13.1 Tank, base and sump assembly

The tank, base and sump are assembled as one unit and aren't

available as a service part. If plastic cable holders, part holders

and screw holes are damaged or stripped, the entire dishwasher

must be replaced.

702_58300000130262_ara_en_c

4.13.2 Rear leveling foot

The rear leveling foot can't be adjusted from the front – the rear

foot is the same as front feet and is adjusted the same way. The

base has provision for two rear feet in the rear corners, but the

center foot factory mounting should be used (below left).

Factory feet positions, like the center rear foot (1), have

provisions for set screws (below right). Outside rear positions

don't have set screw positions and shouldn't be used.

screws are in the installation parts bag.

1 – Center rear foot set screw location

Set

Page 18 of 50