Draper PT140K Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Draper PT140K. Draper PT140K 12 pagina's. Multi-tool kit
Ook voor Draper PT140K: Gebruiksaanwijzing (12 pagina's)

Pagina afdrukken
Draper PT140K Gebruiksaanwijzing
- Connecting to the Power Supply:
To eliminate the possibility of an electric shock your machine has been fitted with a BS approved, non
rewireable moulded plug and cable which incorporates a fuse, the value of which is indicated on the pin
face of the plug. If the plug is marked with the
approved BS1362 fuse must be used of the same amp rating. If the plug is not
with the
symbol,
should be used.
- The fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is
required, ensure it is the same colour as that visible on the pin face of the plug (i.e. red). Fuse covers are
available from your Draper Tools stockist.
If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be
suitably prepared and the correct type of plug fitted. See below.
- *WARNING:
A plug with bare flexible wires exposed is hazardous if engaged in a live power socket outlet.
- WARNING: THIS APPLIANCE IS DOUBLE INSULATED.
- The mains lead is coloured Blue – Neutral, Brown – Live.
- As these colours may not correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:
- The wire which is coloured blue must be connected to the terminal which is marked with the letter 'N' or
coloured black or blue.
The wire which is coloured brown must be connected to the terminal which is marked with the letter 'L' or
coloured red or brown.
- EXTENSION LEAD CHART:
Extension lead sizes shown assure a voltage drop of not more than 5% at rated load of tool.
Ampere rating
(on Name plate)
Extension cable length (Metres)
7.5
15
22.5
30
40

POWER SUPPLY

BS Kitemark, or both
symbol and the fuse needs replacing, an
and
BS Kitemark, of the same amp rating
3
6
Wire Size mm
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
- 3 -
marked, a fuse
10
13
2
1.0
1.25
1.0
1.5
1.0
1.5
1.25
1.5
1.5
2.5