Draper FlexShade NEXD Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Draper FlexShade NEXD. Draper FlexShade NEXD 8 pagina's. Clutch-operated small and large hardware
Ook voor Draper FlexShade NEXD: Installatie- en bedieningsinstructies (6 pagina's), Installatie- en bedieningsinstructies (8 pagina's), Installatie- en bedieningsinstructies (8 pagina's), Installatie- en bedieningsinstructies (10 pagina's), Gebruiksaanwijzing (12 pagina's)

Pagina afdrukken

Draper FlexShade NEXD Gebruiksaanwijzing

Clutch-Operated FlexShade

Small and Large Hardware

Section 2 - Converting Between Left and RIght Mounting Configurations on Wall Mount Endcaps

Figure 4

Section 3 - Shade Fabric Roller Mounting

Caution: Do not allow shade roller to become exposed by running shade fabric too far down. Be sure to use stop balls provided in hardware packet by Draper to

set up and down travel limits. Stop balls by others may be too small, and become lodged in clutch mechanism.

Please Note: If shade fabric is uneven, see "Field Adjustments" on page 2.

Carefully work

open (clutch) end

of roller onto

bead chain clutch.

Tube indentation

must be aligned

with the FLAT side

of the clutch sprocket.

Test shade to

ensure that

roller is level

and operating

properly.

If not, adjust idler

leveling screw with

3mm Hex Wrench,

available upon

request when ordering shade.

NEXD,

(Fig. 5)

Please Note: The idler end

has detents to prevent the pin

from coming out of the idler.

It does allow upward and

downward adjustment within

the vertical cavity.

Pleas Note: Applying 1-2

drops of a medium-strength

threadlocker to the threads of

the height adjustment screw

is recommended prior to final

adjustment.

1. Remove screws and small metal mounting piece from reverse side

of endcap.

2. Insert small metal mounting plate into slots on other side of

endcap,

and use screws to reattach mounting plate to endcap.

page 4 of 8

(Fig. 4)

Slide idler end

pin up through

one of the slots

on idler endcap,

and into seat

for pin.

NOTE

See illustration

for different

path options.

DETENTS