Draper FlexShade NEXD Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wyposażenie wnętrz Draper FlexShade NEXD. Draper FlexShade NEXD 8 stron. Clutch-operated small and large hardware
Również dla Draper FlexShade NEXD: Instrukcja instalacji i obsługi (6 strony), Instrukcje instalacji i obsługi (8 strony), Instrukcje instalacji i obsługi (8 strony), Instrukcje instalacji i obsługi (10 strony), Instrukcja obsługi (12 strony)
Drukuj stronę
Clutch-Operated FlexShade
Small and Large Hardware
Section 2 - Converting Between Left and RIght Mounting Configurations on Wall Mount Endcaps
1.
Figure 4
Section 3 - Shade Fabric Roller Mounting
Caution: Do not allow shade roller to become exposed by running shade fabric too far down. Be sure to use stop balls provided in hardware packet by Draper to
set up and down travel limits. Stop balls by others may be too small, and become lodged in clutch mechanism.
Please Note: If shade fabric is uneven, see "Field Adjustments" on page 2.
1.
Carefully work
open (clutch) end
of roller onto
bead chain clutch.
!
Tube indentation
must be aligned
with the FLAT side
of the clutch sprocket.
3.
Test shade to
ensure that
roller is level
and operating
properly.
4.
If not, adjust idler
leveling screw with
3mm Hex Wrench,
available upon
request when ordering shade.
NEXD,
®
2.
(Fig. 5)
Please Note: The idler end
has detents to prevent the pin
from coming out of the idler.
It does allow upward and
downward adjustment within
the vertical cavity.
Pleas Note: Applying 1-2
drops of a medium-strength
threadlocker to the threads of
the height adjustment screw
is recommended prior to final
adjustment.
1. Remove screws and small metal mounting piece from reverse side
of endcap.
2. Insert small metal mounting plate into slots on other side of
endcap,
and use screws to reattach mounting plate to endcap.
2.
page 4 of 8
(Fig. 4)
Slide idler end
pin up through
one of the slots
on idler endcap,
and into seat
for pin.
:
NOTE
See illustration
for different
path options.
DETENTS