Draper FlexShade NEXD Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wyposażenie wnętrz Draper FlexShade NEXD. Draper FlexShade NEXD 8 stron. Clutch-operated small and large hardware
Również dla Draper FlexShade NEXD: Instrukcja instalacji i obsługi (6 strony), Instrukcje instalacji i obsługi (8 strony), Instrukcje instalacji i obsługi (8 strony), Instrukcje instalacji i obsługi (10 strony), Instrukcja obsługi (12 strony)
Drukuj stronę
Clutch-Operated FlexShade
Small and Large Hardware
Section 6 -Idler End Safety Bracket
1.
Install matte-finished
Safety Bracket
(provided in separate
to idler
packaging)
endcap of shade.
!
If Fascia has been
ordered with this
shade, attach
Bracket to Clutch
endcap as well.
A
Section 7 -Attaching Fascia
1.
Seat groove in the
notch in
and Idler Brackets.
2.
Snap firmly
into place.
!
Fascia is not fully
seated until it clicks
into place on both ends.
Once in place, check
for secure fit.
NEXD,
®
B
please note
Endcaps must be fastened securely to mounting surface and cannot move
from side to side.
If changes, differences, or measurement errors occur on-site, adjust product
by utilizing slotted holes in the endcap [A] to adjust for zero gap between the
fascia and endcap covers.
Once these adjustments are made, utilize round holes [B] to drive additional
screws for securing position.
Please Note: If installing shade or shades in an area where misuse is likely,
this fastening method should be used.
Clutch
both
2.
Install BOTH
C020.680 Screws
to secure Bracket.
!
If shade is jamb
mounted, install
Bracket at the
same time as
mounting endcaps.
1
2
page 6 of 8