Draper FlexShade NEXD Talimatlar Kılavuzu - Sayfa 6

İç Mekan Mobilyaları Draper FlexShade NEXD için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper FlexShade NEXD 8 sayfaları. Clutch-operated small and large hardware
Ayrıca Draper FlexShade NEXD için: Kurulum ve Çalıştırma Talimatları (6 sayfalar), Talimatlar Kurulum ve Çalıştırma (8 sayfalar), Talimatlar Kurulum ve Çalıştırma (8 sayfalar), Talimatlar Kurulum ve Çalıştırma (10 sayfalar), Talimatlar Kılavuzu (12 sayfalar)

Draper FlexShade NEXD Talimatlar Kılavuzu
Clutch-Operated FlexShade
Small and Large Hardware

Section 6 -Idler End Safety Bracket

1.
Install matte-finished
Safety Bracket
(provided in separate
to idler
packaging)
endcap of shade.
!
If Fascia has been
ordered with this
shade, attach
Bracket to Clutch
endcap as well.
A

Section 7 -Attaching Fascia

1.
Seat groove in the
notch in
and Idler Brackets.
2.
Snap firmly
into place.
!
Fascia is not fully
seated until it clicks
into place on both ends.
Once in place, check
for secure fit.
NEXD,
®
B
please note
Endcaps must be fastened securely to mounting surface and cannot move
from side to side.
If changes, differences, or measurement errors occur on-site, adjust product
by utilizing slotted holes in the endcap [A] to adjust for zero gap between the
fascia and endcap covers.
Once these adjustments are made, utilize round holes [B] to drive additional
screws for securing position.
Please Note: If installing shade or shades in an area where misuse is likely,
this fastening method should be used.
Clutch
both
2.
Install BOTH
C020.680 Screws
to secure Bracket.
!
If shade is jamb
mounted, install
Bracket at the
same time as
mounting endcaps.
1
2
page 6 of 8