Electrolux EFLW317TIW Gebruiks- en onderhoudshandleiding - Pagina 30
Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Electrolux EFLW317TIW. Electrolux EFLW317TIW 32 pagina's.
Ook voor Electrolux EFLW317TIW: Handleiding voor installatie-instructies (44 pagina's)
Pagina afdrukken
30
Solutions to Common Inquiries
Service Prevention Checklist
Before calling for service, review this list. It may save both time and expense. The list includes com-
mon occurrences that are not the result of defective workmanship or materials in this washer.
OCCURRENCE
NOISE
Please refer to "Normal Operating Sounds" at the beginning of Operating Instructions.
High pitch "jet engine"
noise.
Rattling and clanking
noise.
Thumping sound.
Vibrating noise.
OPERATING
Washer does not start.
Washer won't spin.
Residue left in drum.
LED displays "dn".
POSSIBLE CAUSE
A certain amount of motor whine is
normal during the spin cycle.
Foreign objects such as coins or
safety pins may be in drum or
pump.
Belt buckles and metal fasteners
are hitting wash drum.
Heavy wash loads may produce
a thumping sound. This is usually
normal. If sound continues, washer
is probably out of balance.
Washer is not resting firmly on floor.
Shipping bolts and foam block
have not been removed during
installation.
Wash load unevenly distributed
in drum.
Electrical power cord may not be
plugged in or connection may be
loose.
House fuse blown, circuit breaker
tripped, or a power outage has
occurred.
Action of pressing start button on
"touch screen" style console not
recognized
Water supply faucets are not
turned on.
Motor is overheated. Washer motor
will stop if it becomes overheated.
Door may be open. Unit will not
operate with door open.
Light next to start/pause button is
flashing indicating unit is paused.
Load is too small.
Heavily soiled items.
Washer has been programmed to
temporarily perform a repeating
demo cycle.
SOLUTION
Stop washer and check drum. If no objects are
found, perform cycle with empty drum. If noise
continues, item may be in pump. Call your
authorized servicer.
To prevent unnecessary noise and damage
to drum, fasten fasteners and turn items inside
out.
Stop washer and redistribute wash load.
Move washer so it rests firmly on floor. Adjust
leveling legs. See INSTALLATION INSTRUC-
TIONS for details.
See INSTALLATION INSTRUCTIONS for
removing shipping bolts and foam block.
Stop washer and rearrange wash load.
Make sure plug fits tightly in wall outlet.
Reset circuit breaker or replace fuse. Do not
increase fuse capacity. If problem is a circuit
overload, have it corrected by a qualified
electrician. If problem is a power outage, call
local electric company.
Press start button with bare fingertip.
Turn on water supply faucets.
It will automatically restart after a cool down
period of up to 30 minutes (if washer has not
been manually turned off).
Ensure door is closed.
Press start button to continue the cycle.
Add 1 or 2 similar items to help balance the
load.
Wipe drum with a nonabrasive household
cleanser, then rinse. Shake or brush excess dirt
and sand from items before washing
Reset the unit back to factory default settings
as described earlier.