Electrolux EW 1055 F Instructieboekje - Pagina 9

Blader online of download pdf Instructieboekje voor {categorie_naam} Electrolux EW 1055 F. Electrolux EW 1055 F 24 pagina's. Electrolux washing machines

Pagina afdrukken

• Drain only

- Press the RESET button once, so as to cause

the DRAIN light to light up, then press the

START/PAUSE button.

Important! If you accidentally press the RESET

button more than once, the display will show

three blinking dashes. To cause the washing

machine to drain the water, select any washing

programme by means of the FABRIC button, then

press RESET three times in order to select the

DRAIN position (only the DRAIN light will remain

lit).

6 OPTIONS button

Press this button to select the following options:

• PREWASH: select this option if you wish your

laundry to be prewashed before the main wash

(not available for wool and hand-wash cycle).

The prewash ends with a short spin at 650 rpm in

programmes for cotton and synthetic fabrics,

whereas in the programme for delicate fabrics the

water is only drained.

• SUPER RINSE: this option can be selected with all

programmes except the wool and hand wash

programme. The machine performs 4 rinses

instead of 3. This option is recommended for

people who are allergic to detergents, and in areas

where the water is very soft.

7 QUICK WASH button

This button allows you to select the QUICK WASH

function, for laundry that is only slightly soiled (not

for wool and HAND WASH programme).

The washing time will be reduced according to the

type of fabric and the selected temperature.

8 Display

The following pieces of information are shown on the

display:

• Three blinking dashes, when a programme is

cancelled by means of the RESET button.

The three blinking dashes will also appear when you

press the ON/OFF button to switch the machine on,

if the previously selected cycle has been erased.

• Duration of washing programme in hours

and minutes, after you have selected a

programme.

While the programme is running (after you have

pressed the START/PAUSE button), the displayed

time value decreases by one unit every minute.

• The washing machine has stopped with water in

the tub, at the end of a programme with the

RINSE HOLD option: this is indicated by a static

zero.

• The washing machine has completed the

programme: this is indicated by a blinking zero.

At the same time, the door locked light goes out.

The zero will reappear when you switch the

washing machine on, unless the previous

programme has been erased by means of the

RESET button.