BDS MABasic 200 Originele gebruiksaanwijzing - Pagina 11
Blader online of download pdf Originele gebruiksaanwijzing voor {categorie_naam} BDS MABasic 200. BDS MABasic 200 20 pagina's.
Ook voor BDS MABasic 200: Vertaling van de originele gebruiksaanwijzing (20 pagina's)
Pagina afdrukken
GB
MABasic 200 and 400
Insert the core drill into the direct tool
mount (illustration A)
Before mounting, clean the Weldon
shank and direct tool mount (2) of the
machine.
Check the the lead connection for
lubricant.
Unscrew the two Allen screws in the
direct tool mount using the hexagonal
offset screwdriver (24) supplied.
Insert the core drill in the direct tool
mount (2).
NOTE
►
Insert the appropriate ejector pin (22)
before inserting the core drill.
Tighten the two Allen screws in the di-
rect tool mount (2) using the hexagonal
offset screwdriver (24) supplied.
Removing the tool
Unscrew the two Allen screws in the
tool mount (2) using the hexagonal
offset screwdriver (24) supplied and
remove the core drill from below.
MABasic 200, 400, 450, 850
MABasic 450 and 850
Insert the core drill into the industrial
holder (illustration B)
Push the industrial holder (25) into the
spindle taper of the machine.
Before inserting, clean the Weldon
shank of the tool and the tool holder.
Check the the lead connection for
lubricant.
Unscrew both Allen screws in the tool
mount using the hexagonal offset
screwdriver (24) supplied.
Insert the core drill into the tool mount.
NOTE
►
Insert the appropriate ejector pin (22)
before inserting the core drill.
Tighten both Allen screws in the tool
mount (2) using the hexagonal offset
screwdriver (24) supplied.
Removing the tool
Unscrew the two Allen screws in the
tool mount (2) using the hexagonal
offset screwdriver (24) supplied and
remove the core drill from below.
Preparation
11