Drazice OKC 200 NTRR / BP Bedienings- en installatiehandleiding - Pagina 6

Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} Drazice OKC 200 NTRR / BP. Drazice OKC 200 NTRR / BP 13 pagina's. Stationary water heaters
Ook voor Drazice OKC 200 NTRR / BP: Bedienings- en installatiehandleiding (17 pagina's), Bedienings- en installatiehandleiding (12 pagina's), Bedienings- en installatiehandleiding (19 pagina's), Bedienings- en installatiehandleiding (20 pagina's), Bedienings- en installatiehandleiding (20 pagina's), Bedienings- en installatiehandleiding (18 pagina's), Bedienings- en installatiehandleiding (20 pagina's), Bedienings- en installatiehandleiding (18 pagina's)

OKCE 300 NTR/2,2 kW, OKCE 300 NTR/3-6 kW

OKC 300 NTR/BP

HSW (Hot Service Water) TEMPERATURE CONTROL

HSW TEMPERATURE CONTROL for 300 litre heaters – the panel is a part of the heater

Each heater has a separate HSW temperature control for every exchanger. The temperature of water can be set

between 5-74°C.

A vertical double thermowell is welded onto the tank shell for the controller sensors, for each exchanger. If an

external temperature control is used, the thermowell is adapted for 7 and 10 mm diameter probes. The probes can

be shifted vertically for proper adjustment of the entire system.

Exchanger control panels:

NTRR top exchanger control

panel:

Capillary thermostat and

thermometer

OKCE 300 NTRR/2,2 kW, OKCE 300 NTRR/3-6 kW

OKC 300 NTRR/BP

NTR & NTR lower exchanger

control panel:

kapilárový termostat

6 0

Cover panel if external HSW

temperature control is used