Anchor Explorer Pro Gebruikershandleiding
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Anchor Explorer Pro. Anchor Explorer Pro 13 pagina's. Anchor audio portable sound system
Ook voor Anchor Explorer Pro: Gebruikershandleiding (8 pagina's), Gebruikershandleiding (4 pagina's), Gebruikershandleiding (8 pagina's)
Pagina afdrukken
- 1. Troubleshooting Guide
- 2. Important Safeguards
- 3. Specifications
- 4. Getting Started
- 5. Wireless Microphone Operation
- 6. Wireless Operation
- 7. Battery Operation
- 8. Battery Level Indicator
- 9. Charging Batteries
- 10. Replacing Transmitter Battery
- 11. General Operation
- 12. Line Inputs
- 13. Line Outputs
- 14. Speaker Output
Having trouble with the sound system?
Condition
No sound (power LED not lit):
Charge indicator doesn't light:
No sound (power LED lights):
Shortened battery life:
Distorted sound:
Excessive hum or noise:
Having trouble with the wireless system?
Condition
No sound (RX ON indicator lights):
No sound (RX ON indicator off):
TROUBLESHOOTING GUIDE
Possible Solution
• turn POWER switch ON
• charge battery or plug in AC cord
• leave plugged in for 48 hours to repair battery
• check for output from source
• make sure all cables are completely plugged in
• turn up volume control of input used
• remove plug from speaker output if not using
external speaker output
• charge battery fully; if battery life continues to
deteriorate, contact Anchor customer service
• lower system volume control
• use shielded cables
• use balanced microphone
Possible Solution
• set MUTE switch to on (handheld mic only)
• turn up WIRELESS volume control
• make sure mic is plugged into bodypack
transmitter
• pull VOLUME knob
• turn Explorer POWER switch on
• make sure transmitter power switch is on
• set receiver and transmitter to same channel
• replace battery in transmitter
ANCHOR Audio, Inc. (310) 784-2300
100-0143-000 / Revision 1 - 03/04
(Wireless Models Only)