Anchor AF-4003 Handleiding voor snelle installatie - Pagina 4

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Anchor AF-4003. Anchor AF-4003 9 pagina's. Under counter water filter system
Ook voor Anchor AF-4003: Handleiding voor installatie-instructies (10 pagina's), Handleiding voor snelle installatie (9 pagina's)

- Do not install on HOT WATER. Temperature of water supply to the

filter system must be between minimum of 40°F and maximum of

90°F.

- The assembly can stand up in the sink cabinet or can be hung on

screws.

- Use PTFE (Teflon) tape for the fittings and do not overtighten.

COLOR CODE FOR TUBING

Use the color-coded tubing to make connections as follows:

A. Red tubing connects water supply adapter to inlet side of the

assembly

B. Blue tubing connects the faucet to the outlet side of assembly

Feed Water Supply

1. Close the cold-water supply valve under the sink.

2. Unscrew the flexible tubing from the supply valve that connects to

the COLD-water riser.

NOTE: If the cold water shut-off valve fails to turn off the water,

house water supply can be turned off at the main water supply.

3. Disconnect the threaded nut at the

connection, and with the flat washer in

place, thread the feed water supply adapter

onto the connection and tighten. Connect

the Red Tube to the water supply adapter

with the treaded nut and tighten. DO NOT

OVER TIGHTEN.

4. Thread the needle valve into the adapter

tightly and turn the handle clockwise all the

way in. Open the main water supply valve

and several house faucets to purge air from

the system. Close faucets when water runs

smoothly. Turn on cold water supply to the

sink faucet and check for leaks

Red Tubing