Anchor WR-6400 Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Anchor WR-6400. Anchor WR-6400 4 pagina's. 64 channel uhf wireless system

Pagina afdrukken

A MESSAGE FROM THE OWNER

Thank you for choosing an Anchor Audio portable sound system. Our products incorporate state-of-the-art design and the finest

quality of materials and workmanship. We're proud of our products and appreciate the confidence which you have shown by se-

lecting an Anchor system.

I hope you'll take a few minutes to review this manual. We've incorporated several unique features into our products, and your

knowledge of how to use them will enhance the performance and your enjoyment of the system.

David Jacobs, President

on behalf of all Anchor Employees

GETTING STARTED

Please check your new unit carefully for any damage which may have occurred during shipment. Each Anchor product is carefully

inspected at the factory and packed in specially designed boxes for safe transport.

Notify the freight carrier immediately of any damage to the shipping box or product. Repack the unit in the original box and wait

for inspection by the carrier's claim agent. Notify your dealer of the pending freight claim.

NOTE: All damage claims must be made with freight carrier!

RETURNING SYSTEMS FOR SERVICE OR REPAIR

For service or repair, please contact the dealer you purchased your system from or Anchor Audio Customer Service at (888) 444-6077

to obtain a RA (Return Authorization) number. All shipments to Anchor Audio must include an RA number and must be shipped

prepaid. C.O.D. shipments will be refused and returned at your expense.

IMPORTANT: Save the shipping box & packing materials,

they were specially designed to ship your unit!

WARRANTY REGISTRATION

Visit our website at www.anchoraudio.com and select "Warranty Registration". Complete the online form to activate the six-year

limited warranty on your Liberty sound system and two-year limited warranty for the CD player and microphones.

ANCHOR WIRELESS 64 CHANNEL UHF SYSTEMS & ACCESSORIES

UHF-6400US/HH

64 CHANNEL RECEIVER & HANDHELD MICROPHONE/TRANSMITTER

UHF-6400US/BP

64 CHANNEL RECEIVER & BODY-PACK TRANSMITTER W/ HANDS FREE MICROPHONE

WIRELESS ACCESSORIES

WH-6400

64 channel wireless handheld microphone/transmitter

WB-6400

64 channel wireless body-pack transmitter for hands free microphone

(microphone not included - see below)

CM-60

Lightweight, low-profile collar microphone - works w/ the WB-6400 transmitter

EM-60T

UltraLite "Over-the-Ear" hands free microphone - works w/ the WB-6400 transmitter

HBM-60

Ultra-lightweight headband microphone - works w/ the WB-6400 transmitter

LM-60

Lightweight, clip-on lapel microphone - works w/ the WB-6400 transmitter

OPERATING THE WIRELESS MICROPHONE / TRANSMITTER

CHANNEL SELECTION - HANDHELD TRANSMITTER

1. Unscrew battery cover on bottom of microphone

2. Set the CHANNEL & GROUP SELECTOR dials to

match the setting of your receiver

3. Replace battery cover and tighten firmly

NOTE: When using dual wireless, each microphone must be set to a different channel!

USING YOUR WIRELESS MICROPHONES

After you have set the transmitter channel (see above) you are ready to use your wireless microphone:

1. Body-pack transmitter users must insert the mic

plug into the transmitter jack marked MIC

2. Turn the transmitter power switch to ON

(The red LED will flash when the mic is turned on.

If the red LED stays on, the battery is low)

CAUTION: Harmful feedback may occur when walking in front of a sound system or

speaker with a wireless microphone. Always point microphone away from speakers!

REPLACE BATTERY - HANDHELD TRANSMITTER

1. Unscrew battery cover on bottom of microphone

2. Replace old batteries with 2 fresh size 'AA'

alkaline batteries

3. Replace battery cover and tighten firmly

NOTE: Transmitter power must be OFF when changing batteries!

CHANNEL SELECTION - BODY-PACK TRANSMITTER

1. The selection dials are located on the

side of the transmitter

2. Set the CHANNEL & GROUP SELECTOR dials to

match the setting of your receiver

3. Turn the receiver power switch to ON

4. The RX & AF indicators will light when the wireless

signal is being transmitted and received

REPLACE BATTERY - BODY-PACK TRANSMITTER

1. Slide open battery cover on front of transmitter

2. Replace old batteries with 2 fresh size 'AA'

alkaline batteries

3. Replace battery cover by sliding firmly into place