Anchor-Caddie TMB101 Gebruiksaanwijzing

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Anchor-Caddie TMB101. Anchor-Caddie TMB101 6 pagina's. Trolling motor bracket adapter kit

Pagina afdrukken

Trolling Motor Bracket Adapter Kit (TMB101)

Thank you for choosing Anchor Caddie and this adapter kit! It is specifically designed to be mounted on the top plate of

the most common quick release brackets by Minn Kota and Motorguide but may fit others.

Please note, if you do not have your bow mount trolling motor on a Minn Kota or Motorguide quick release bracket, you

will need 2 quick release brackets of the same exact type. 1 for your bow mount trolling motor and the other for this

adapter kit and anchor nest.

If you do already have a quick release bracket on your boat, you will need 1 more additional quick release bracket of the

same exact type for this adapter kit and anchor nest.

You can also watch the installation video on our website at www.anchor-caddie.com/support

Before attempting to install this adapter kit, please make sure that you have all the parts on the list below. If you are

missing something or have a question, please contact us immediately at 888-405-3930.

What's Included

Base Bracket (1)

What's NOT Included

•

Minn Kota or Motorguide quick release bracket and hardware

•

Anchor Caddie anchor nest

Tools Needed

™ 2021 Anchor-Caddie

Top Mounting

Bottom Mounting

Plate (1)

•

3/16" allen wrench

•

5/32" allen wrench

•

7/16" combination wrench

•

1/2" combination wrench

•

Phillips screwdriver

•

Drill

•

1/8" & 5/16" drill bit

•

Center punch

Step 1 Hardware

5/16-18 x 1-1/4"

Screw (2)

5/16-18 x 3/4"

Screw (4)

5/16-18 Lock Nut (5)

Not shown, 1 tube of anti-seize compound

Step 2, 6 & 8 Hardware

¼-20 x ¾"

Screw (7)

¼" Lock Washer (7)

¼" Flat Washer (7)

Page 1 of 6