AND UA-621 Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AND UA-621. AND UA-621 18 pagina's.

Pagina afdrukken

Model UA-621 is designed to detect the pulse and to inflate the cuff to a systolic

pressure level automatically.

If your systolic pressure is expected to exceed 230 mmHg, read

"Measurement With The Desired Systolic Pressure" on the next page.

Normal Measurement

1. Place the cuff on the arm (preferably the left arm).

Sit quietly during measurement.

2. Press the

START

The average blood pressures and last data

number are displayed briefly.

Then the display changes, as indicated in the

figure at the right, as the measurement

begins. The cuff starts to inflate. It is normal

for the cuff to feel very tight. A pressure bar

indicator is displayed, as in the figure at the

right, during inflation.

Note: If you wish to stop inflation at any time,

press the

3. When inflation is complete, deflation starts

automatically and the

indicating that the measurement is in

progress. Once the pulse is detected, the

mark blinks with each pulse beat.

Note: If an appropriate pressure is not obtained,

the device starts to inflate again

automatically.

4. When the measurement is complete, the

systolic and diastolic pressure readings and

pulse rate are displayed. The cuff exhausts

the remaining air and deflates completely.

5. Press the

START

the power.

Note: Model UA-621 is provided with an automatic

power shut-off function. Allow at least three

minutes between measurements on the same

person.

Measurements

button.

button again.

START

(heart mark) blinks,

button again to turn off

Averaged data

Data number

Systolic pressure

Diastolic pressure

WHO classification

At heart level

button

START

Starts inflation

Pressurizing

Measurement

in progress

Pulse rate

Exhausts remaining

air automatically