AND UA-621 Gebruiksaanwijzing - Pagina 12

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AND UA-621. AND UA-621 18 pagina's.

The device automatically stores up to thirty blood pressure and pulse

measurements in memory. Data stored in memory are assigned a data number

in the order of the newest to the oldest. The oldest data displays as "n01". The M

symbol in the upper left corner of the display indicates that you are viewing

previous data stored in memory.

1. When nothing is displayed, press and hold the

button to display the data number.

START

The data number of the most recent

measurement and the data are displayed.

2. The data are automatically displayed in turn.

3. The display will shut off automatically after all

data is displayed.

Note: If you press the

recalling data, the device starts

measurement.

Remove the batteries to clear all data. Re-install them again.

If there is no data stored in memory, you will see two 0s displayed

vertically followed by a blinking "A00".

About Memory

button while

START

Press and hold