Carmanah E Series Installatiehandleiding - Pagina 11

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Carmanah E Series. Carmanah E Series 20 pagina's. Traffic beacon systems
Ook voor Carmanah E Series: Snelstarthandleiding (20 pagina's), Installatiehandleiding (16 pagina's), Handleiding vervanging energiebeheersysteem (12 pagina's), Gebruikershandleiding (18 pagina's), Vervangingshandleiding (9 pagina's), Installatiehandleiding (18 pagina's)

Pagina afdrukken
Carmanah E Series Installatiehandleiding
• Obtain 3" of red wire supplied with the kit and strip both ends to 0.35".
• Insert one end of 3" red wire into PBS+ terminal.
• Route modified AI harness wires (from Steps 2 – 5, violet, blue, black, red and yellow)
into the hole shown.
• Install the wires into the terminals as follows:
9
Violet →
3-position splice terminal with red wire going to PBS+
→
Blue
EXT1
→
Red
Middle BAT+
Black →
Middle BAT−
If the system has a push
button, insert the positive
push button wire into the
empty position of the 3-
position splice terminal.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com
Install AI Harness
Blue
(EXT1)
(PBS+)
Violet and
red (splice
terminal
• Align ends of heatshrink on both harnesses near end of
sheet metal tab.
10
• Cable tie around both harnesses and sheet metal tab.
APPLIED INFORMATION (AI) INTEGRATION KIT INSTALL GUIDE
Red
Red
(BAT+)
E/F Series
Black
(BAT−)
Page 11