Carmanah E Series Kurulum Kılavuzu - Sayfa 11

Radar Carmanah E Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Carmanah E Series 20 sayfaları. Traffic beacon systems
Ayrıca Carmanah E Series için: Hızlı Başlangıç Kılavuzu (20 sayfalar), Kurulum Kılavuzu (16 sayfalar), Enerji Yönetim Sistemi Değiştirme Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Değiştirme Kılavuzu (9 sayfalar), Kurulum Kılavuzu (18 sayfalar)

• Obtain 3" of red wire supplied with the kit and strip both ends to 0.35".

• Insert one end of 3" red wire into PBS+ terminal.

• Route modified AI harness wires (from Steps 2 – 5, violet, blue, black, red and yellow)

into the hole shown.

• Install the wires into the terminals as follows:

Violet →

3-position splice terminal with red wire going to PBS+

→

Blue

EXT1

→

Red

Middle BAT+

Black →

Middle BAT−

If the system has a push

button, insert the positive

push button wire into the

empty position of the 3-

position splice terminal.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com

Install AI Harness

Blue

(EXT1)

(PBS+)

Violet and

red (splice

terminal

• Align ends of heatshrink on both harnesses near end of

sheet metal tab.

• Cable tie around both harnesses and sheet metal tab.

APPLIED INFORMATION (AI) INTEGRATION KIT INSTALL GUIDE

Red

(BAT+)

E/F Series

Black

(BAT−)

Page 11