Dreame H12 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dreame H12. Dreame H12 14 pagina's. Wet and dry vacuum

Installation

Installing the Handle

Insert the end of the handle vertically into the port on the top of the appliance as

indicated until you hear a click.

咔哒

Click

Note: To disassemble, extend a hard object into the hole on the back of the appliance to press contacts

and pull the handle upwards at the same time.

Installing the

Storage Box

Install the storage box onto the charging

base.

Note: To remove the support rod, extend a tool into the hole on the bottom of the mount to press contacts and pull the

rod upwards at the same time.

Installing the Accessory

Storage Mount

Insert the support rod vertically into the

storage mount until you hear a click.

咔哒

Click

Charging

1. Place the charging base against a wall on level ground and connect it to a

power source. Fully charge the appliance before first use.

2. Place the appliance on the charging base, the on the screen will light up to indicate

the charging status. When charging, the number on the display screen represents the

current battery level as a percentage. When the number reaches 100, the battery is

fully charged and the will turn off.

Note:

•

If no operation is performed within 10 minutes, the appliance will enter the sleep mode.

•

To extend the battery life time, the battery keeps cooling down for about one hour automatically after you

have used the appliance for a long time.