Carmanah R247-G Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} Carmanah R247-G. Carmanah R247-G 9 pagina's. Wireless control
Ook voor Carmanah R247-G: Snelstarthandleiding (16 pagina's), Handmatig (11 pagina's), Handleiding vervanging energiebeheersysteem (12 pagina's), Handboek voor het vervangen van kastdeuren (10 pagina's), Handmatig (10 pagina's), Installatiehandleiding (14 pagina's), Handmatig (10 pagina's), Handmatig (10 pagina's), Gebruiksaanwijzing Supplement (12 pagina's)

4. Route the green AC ground wire from the AC backplane to the grounding stud on the left side of the

cabinet. If you have the Polara XAV push button option, you will need to route it behind the control board.

5. Ensure the circuit breaker on the AC backplane is turned off.

6. Wire AC power into the cabinet following the AC Input label color coding (black wire to BK Line, white

wire to WT Neutral, green to GN Ground).

7. Strain relief the AC wires to the AC backplane using the provided cable ties.

8. Ensure the AC wiring is secure and installed with the proper polarity.

9. Insert Solar and Battery/DC Power fuses into fuse holders on right side of cabinet (the solar fuse holder is

a location to store a spare fuse).

10. Turn on the source AC power and then the circuit breaker in the cabinet. Ensure the EMS (Energy

Management System) powers up and the OBUI (on-board user-interface) visibly lights up.

11. Test system and ensure it is operating as prior to the retrofit.

a. Ensure the battery (power supply) voltage is ~15V.

b. Run the BIST (built-in self-test) and verify you only have a charging error (4000), which is normal

for AC-powered systems.

c. Visit

support.carmanah.com

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

for a list of BIST error codes.

SOLAR TO AC RETROFIT GUIDE

carmanah.com