Andatech AkcoSense Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Andatech AkcoSense. Andatech AkcoSense 4 pagina's. Mini breathalyser

Operating Instructions

1. Turning on the power

Slide off the battery cover and remove the battery protector strip

To turn the unit on, press and hold the power button for 2 seconds.

The unit will commence a start up process to automatically re-stabilise the alcohol sensor.

The display will undergo a countdown sequence, indicating that purge cycles and circuit

tests are taking place. This process generally takes 30 seconds but it may last up to 2

minutes. The unit is ready when it gives out two beeps and the 'WAIT' signal disappears

from the bottom left of screen.

2. Blow into the unit

Making sure that your mouth is approximately 2cm away from he intake sensor, blow one

deep breath. Once you have reached the optimum flow rate, you will hear a continuous

beep indicating for you to keep blowing. The unit will beep twice once sampling is complete.

Please note: Alcohol vapour on your breath will cause a higher reading. We recommend

having a glass of water prior to testing and waiting at least 20 minutes after your last drink

for a more accurate result.

3. Display

Range

0.00 – 0.01% breathe sample alcohol reading

0.02 – 0.04% breathe sample alcohol reading

Over 0.04% breathe sample alcohol reading

4. Retesting

When the 'WAIT' sign on the LCD is no longer illuminated and 0.00 is displayed, the unit has

been reset and ready for retesting.

5. Low Battery Indicator

AlcoSense Mini will let you know when the batteries in the unit are running low and needs

to be replaced. The

battery runs low. New batteries (2x "AA" size) should be installed before retesting.

Note: the low battery signal flashes briefly during start-up. This does not mean the battery

runs low.

Audio Sound

1 beep

2 beep

5 seconds beep

symbol will be displayed on the screen during use when the