Andatech AkcoSense Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de teste Andatech AkcoSense. Andatech AkcoSense 4 páginas. Mini breathalyser

Operating Instructions
1. Turning on the power
Slide off the battery cover and remove the battery protector strip
To turn the unit on, press and hold the power button for 2 seconds.
The unit will commence a start up process to automatically re-stabilise the alcohol sensor.
The display will undergo a countdown sequence, indicating that purge cycles and circuit
tests are taking place. This process generally takes 30 seconds but it may last up to 2
minutes. The unit is ready when it gives out two beeps and the 'WAIT' signal disappears
from the bottom left of screen.
2. Blow into the unit
Making sure that your mouth is approximately 2cm away from he intake sensor, blow one
deep breath. Once you have reached the optimum flow rate, you will hear a continuous
beep indicating for you to keep blowing. The unit will beep twice once sampling is complete.
Please note: Alcohol vapour on your breath will cause a higher reading. We recommend
having a glass of water prior to testing and waiting at least 20 minutes after your last drink
for a more accurate result.
3. Display
Range
0.00 – 0.01% breathe sample alcohol reading
0.02 – 0.04% breathe sample alcohol reading
Over 0.04% breathe sample alcohol reading
4. Retesting
When the 'WAIT' sign on the LCD is no longer illuminated and 0.00 is displayed, the unit has
been reset and ready for retesting.
5. Low Battery Indicator
AlcoSense Mini will let you know when the batteries in the unit are running low and needs
to be replaced. The
battery runs low. New batteries (2x "AA" size) should be installed before retesting.
Note: the low battery signal flashes briefly during start-up. This does not mean the battery
runs low.
Audio Sound
1 beep
2 beep
5 seconds beep
symbol will be displayed on the screen during use when the